Removing Clutch
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- To avoid deforming the clutch pressure plate, always loosen fastening screws in several steps and in diagonally opposite sequence.
- This procedure is not required when replacing the clutch.
Information
- When loosening the clutch pressure plate, ensure that the lock on the adjustment device detaches from the housing.
- The lock must dip loosely into the housing as far as it will go. Press the lock towards the flywheel, if necessary.
- Loosen the pressure plate according to specifications.
- 1.1. Be careful with the adjustment device -arrow-.
- Remove pressure plate and drive plate.