LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 665819 Removing And Installing Rear Spoiler (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO) >> Installing Rear Spoiler

Installing Rear Spoiler

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw on rear spoiler module to until secure.
  3. Tighten fastening screw on rear apron to Tightening torque 3.2 Nm (2 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)  until secure.
  4. Tighten fastening screw on lower part of spoiler to until secure.
  5. Tighten fastening screw on upper part of rear spoiler to until secure.
scientia non olet · About LEMON Manuals