LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 665619 Removing And Installing Ventilation Grille For Lid (Upper) (Gt3 RS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screws on rear lid, lower Item 1 Tightening torque 5.6 Nm (4.5 ftlb.)    
G09995027

Fastening screws on rear lid 
Fastening screws on rear lid, back Item 1 Tightening torque 5.6 Nm (4.5 ftlb.)    
G09995028

Fastening screws on back of rear lid 
scientia non olet · About LEMON Manuals