Removing Roof Joint Cover Strip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Roof Joint Cover Strip Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

CAUTION: Pointed or sharp objects

Risk of cracks, pricks or cuts

→ Wear personal protective gear.

Cover accessories adjacent to the repair area on the vehicle.
Pull out the seal -1- .
1. 2.1. Remove adhesive residue if necessary.
  
  Fig 2: Removing Seal
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut plastic clamp -1- on the seal at the front and rear using a suitable tool.

Fig 3: Cutting Plastic Clamp
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 3.1. Remove plastic component you have just cut off.