Installing Door Entry Guard
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- Check that the door entry guard is seated exactly. Check gaps and gap dimensions.
- Fastening screw on body, front. Tightening torque 3 Nm (2 ftlb.)
- Fastening nut securing wheel housing liner to body. Tightening torque 3 Nm (2 ftlb.)
- Fastening screw, rear, underside. Tightening torque 2 Nm (1.5 ftlb.)