LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 408537 Disassembling And Assembling Front Spring Strut (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Spring-strut supporting mount to piston rod Lock nut, M14 x 1.5 Tightening torque 70 Nm (52 ftlb.)    
Actuator holder (PDCC) to spring strut (shock absorber pipe) Hexagon-head bolt, M10 x 55 Tightening torque 46 Nm (34 ftlb.)    
scientia non olet · About LEMON Manuals