LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 945719 Removing And Installing Control Unit For Gas Discharge (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Control Unit For Gas Discharge >> Removing Main Headlight Lid

Removing Main Headlight Lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew the four fastening screws -1-  on the lid.
    Fig 1: Removing Lid Fastening Screws
    G09830844Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release the lid at one attachment point at the top and two at the bottom -a-  and remove it from the main headlight.
    Fig 2: Releasing Lid
    G09830845Courtesy of PORSCHE CARS NORTH AMERICA, INC.


  1. Unscrew the four fastening screws -1-  on the lid.
    Fig 1: Fastening Screws For Lid
    G09830858Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release the lid at one attachment point at the top and two at the bottom -a-  and remove it from the main headlight.
    Fig 2: Releasing Lid
    G09830859Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals