LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the wheel bearing or wheel bearing housing is replaced, loosen the central nut on the wheel side before raising the vehicle. Actuate the brake while doing this.
  2. Raise the vehicle → 400000 LIFTING THE VEHICLE .
  3. Remove front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  4. Remove front underbody panel → 519219 REMOVING AND INSTALLING FRONT COVER .
scientia non olet · About LEMON Manuals