LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Installing Wheel Bearing Housing >> Fitting Front-Axle Control Arm, Left

Fitting Front-Axle Control Arm, Left

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Centre bore in road model
  2. Rear bore only for Cup vehicles (for racing circuit camber values)
    1. A  - Front left trailing arm
    2. C  - Direction of travel
      Fig 1: Identifying Front-Axle Control Arm - Left
      G09825567Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals