Installing Diagonal Arm

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Installation is carried out in reverse order.
Use new lock nut(s).

Tighten threaded joints -1 + 2- to the specified tightening torque → 4001TW TIGHTENING TORQUES FOR FRONT AXLE .

Fig 1: Identifying Diagonal Arm Components
Courtesy of PORSCHE CARS NORTH AMERICA, INC.