LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (46 - Brakes - Brake Mechanics -- CARRERA (997)) >> WM 466119 Removing And Installing Parking-Brake Lever (All Models) >> Removing Parking-Brake Lever

Removing Parking-Brake Lever

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The parking-brake lever -1-  is supplied as a spare part, complete with bracket, cover -2-  and switch -3-  (for warning light indicating that the parking brake is on).

Fig 1: Identifying Parking-Brake Lever Components
G09826244Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Disengage parking-brake cable -5-  at the parking-brake lever. This releases the parking-brake lever -1-  .

    Pull off plug on switch -3-  .

  2. Remove parking-brake lever and mounting saddle assembly -1-  after first removing the fastening nuts -4-  .
    3. Fig 2: Removing Parking-Brake Lever
    G09826245Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals