LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing module for automatic headlight beam adjustment >> Installation

Removing and installing module for automatic headlight beam adjustment: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage the electrical plug connection and fasten the control module to the bracket.
  2. Install the right-hand air guide and footwell bulkhead.
  3. After installation, the control module must be encoded and calibrated with the Porsche System Tester 2. After this, the headlights must be readjusted using a standard 5 mm ball-head screwdriver.
NOTE: For details of headlight adjustment, refer to ADJUSTING THE MAIN HEADLIGHTS, USA VERSION .
scientia non olet · About LEMON Manuals