LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing main light switch >> Installation

Removing and installing main light switch: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage light switch by turning it slightly in counter-clockwise direction. Tightening torque of the hexagon nut M16 x 1: 3.5 Nm (2.5 ftlb.)
  2. Engage electrical plug connections and install side vent.
  3. Connect the battery and perform a function test.
scientia non olet · About LEMON Manuals