Removing and installing gas discharge lamp (Litronic headlights): Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Warning signs (yellow triangle with black high-voltage arrow) indicate high voltage (risk of fatal injury).
- When changing a bulb, the light must always be switched off before the headlight is opened. Once removed, a headlight is not under high voltage.
- The gas discharge lamp (D2S lamp) may only be operated when installed in the reflector and with the headlight installed.
- Gloves must be worn for changing bulbs. Do not touch the glass bulb.