Removing and installing bulb for additional brake light: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Insert new bulb in the bulb holder. Engage fastening tabs and connect electrical plug connection.
- Insert additional brake light and turn lock approx. 90° clockwise.
- Push corner segment into the lock and clip it in.
- Perform a function test.