Technical Values
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake booster (vacuum) | Diameter | 10 Zoll | |||
| Brake booster transmission ratio (i) | Ratio | 4.5 | |||
| Diameter of brake master cylinder, front/rear | Diameter | 23.81/23.81 mm | |||
| Brake master cylinder stroke, front/rear | Measured value | 20.5/15.5 mm | |||
| Brake disc diameter, front | Diameter | 298 mm | |||
| Brake disc diameter, rear | Diameter | 299 mm | |||
| Effective brake disc diameter, front | Diameter | 250 mm | |||
| Effective brake disc diameter, rear | Diameter | 247.6 mm | |||
| Piston diameter in four-piston brake calliper, front | 2x | Diameter | 40 mm | ||
| Piston diameter in four-piston brake calliper, front | 2x | Diameter | 36 mm | ||
| Piston diameter in four-piston brake calliper, rear | 2x | Diameter | 30 mm | ||
| Piston diameter in four-piston brake calliper, rear | 2x | Diameter | 28 mm | ||
| Effective brake pad area, front | Area | 214 cm2 | |||
| Effective brake pad area, rear | Area | 192 cm2 | |||
| Total brake pad area | Area | 406 cm2 | |||
| Pad thickness, front | Measured value | approx. 11.0 mm | |||
| Pad thickness, front (wear limit) | Measured value | 2 mm | |||
| Pad thickness, rear | Measured value | approx. 11.0 mm | |||
| Pad thickness, rear (wear limit) | Measured value | 2 mm | |||
| Brake disc thickness, new, front | Up to and including model year 2008 | Measured value | 24 mm | ||
| Brake disc thickness, new, front | As of model year 2009 | Measured value | 28 mm | ||
| Brake disc thickness, new (rear) | Measured value | 20 mm | |||
| Minimum brake disc thickness after machining, front | Up to and including model year 2008. Brake disc can only be reworked symmetrically, i.e. equally from both sides! | Measured value | 22.6 mm | ||
| Minimum brake disc thickness after machining, front | As of model year 2009. Brake disc can only be reworked symmetrically, i.e. equally from both sides! | Measured value | 26.6 mm | ||
| Minimum brake disc thickness after machining, rear | Brake disc can only be reworked symmetrically, i.e. equally from both sides! | Measured value | 18.6 mm | ||
| Brake disc wear limit, front | Up to and including model year 2008 | Measured value | 22.0 mm | ||
| Brake disc wear limit, front | As of model year 2009 | Measured value | 26.0 mm | ||
| Brake disc wear limit, rear | Measured value | 18.0 mm | |||
| Peak-to-valley surface roughness of brake disc after machining (max.) | Measured value | 0.006 mm | |||
| Thickness tolerance of brake discs (max.) | Measured value | 0.02 mm | |||
| Lateral runout of brake disc (max.) | Measured value | 0.03 mm | |||
| Lateral runout of wheel hub (max.) | Measured value | 0.03 mm | |||
| Lateral runout of brake disc when installed (max.) | Measured value | 0.06 mm | |||
| Push-rod play | Measured at brake pedal plate | Measured value | approx. 1 mm | ||
| Diameter of parking-brake drum | Parking brake/hand brake (drum brake acting mechanically on both rear wheels) | Diameter | 180 mm | ||
| Diameter of parking-brake drum, wear limit | Diameter | 181 mm | |||
| Width of parking-brake shoe | Measured value | 25 mm | |||
| Thickness of parking-brake pad | Measured value | 4.5 mm | |||
| Thickness of parking-brake pad, wear limit | Measured value | 2 mm |