Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Lower wishbone to rear-axle cross member (camber eccentric) | M12 x 1.5 | Tightening torque | 100 Nm (74 ftlb.) | ||
| Lower wishbone to wheel carrier | M12 x 1.5 x 105/always replace screws following removal | Initial tightening | 90 Nm (67 ftlb.) | ||
| Lower wishbone to wheel carrier | M12 x 1.5 x 105/always replace screws following removal | Final tightening | +90° |