LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 - Brakes - Brake Mechanics -- (981) BOXSTER/CAYMAN >> WM 463856 Replacing Rear Disc Brake Pads (CAYMAN Gt4) >> Replacing Rear Disc Brake Pads >> Installing Rear Disc Brake Pads

Installing Rear Disc Brake Pads

Information 

WARNING: Old mounting parts fitted on the brake calliper
  • Reduced braking effect
  • Risk of damage to the brake calliper

→ Fit new pad retaining springs

→ Fit new fastening screws

  1. Fit new pad retaining springs.
    WARNING: Installation of brake pads with the wrong brake pad quality
    • Longer braking distance
    • More wear on brake pads

    → Only use the type-specific brake pads .

    → Replace the brake pads when the brake pad wear indicator light comes on, but no later than when there is a residual pad thickness of 2 mm on each axle.

    → Replace the brake discs on each axle as soon as the brake pad wear limit is reached.

  2. Fit disc brake pads in reverse order to removal -direction arrow-  .
    Fig 1: Fitting Brake Pads
    G10026574Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit the brake calliper in reverse order to removal. While doing this, check that the brake hose is routed correctly (do not twist the brake hose!).

    Use new fastening screws -arrows-  . Tightening torque 85 Nm (63 ftlb.) 

    Brake hose bracket to wheel bearing housing: Tightening torque 10 Nm 

    Fig 2: Locating Brake Calliper Fastening Screws
    G10026575Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Position disc brake pads by operating the brake several times.
  5. Check the brake fluid level and correct it if necessary.

    The brake fluid level must be between the MIN and MAX markings → MIN/MAX markings for brake fluid  .

    Fig 3: Identifying Brake Fluid Reservoir Min/Max Mark
    G10026576Courtesy of PORSCHE CARS NORTH AMERICA, INC.