LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (48 - Steering -- 911 CARRERA (991)) >> WM 481319 Removing And Installing Trim Panel (Steering-Column Switch) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installing Trim Panel (Steering-Column Switch)

Installing Trim Panel (Steering-Column Switch)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. The trim panel (steering-column switch) is installed in the reverse order to removal.

    Tightening torques: 

    Fastening screw for the steering-wheel adjustment handle 3.2 Nm

    Fastening screw for the steering-column switch trim panel, lower part: 2 Nm

scientia non olet · About LEMON Manuals