Installing Lower Part Of Rear Spoiler
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install wire harness.
- Fit and position lower part of rear spoiler. Tighten fastening screws slightly.
- Engage upper part of rear spoiler.
- 3.1. Guide in the rear spoiler, check joints and gaps and re-adjust if necessary.
- 3.2. Remove upper part of rear spoiler and secure lower part of rear spoiler. Tightening torque 9.7 Nm (7.5 ftlb.)