Removing Ventilation Grille For Lid (Rear)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ventilation Grille For Lid Installation Position (Rear)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Open the rear lid.
Unscrew fastening screws -1- and -2- on the underside of the rear lid.

Fig 2: Identifying Ventilation Grille Fastening Screws To Rear Of Rear Lid
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- between the grille and retaining frame.

Fig 3: Identifying Fastening Screws Between Grille And Retaining Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip retaining frame with grille.

Fig 4: Identifying Retaining Frame With Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.