LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 945719 Removing And Installing Control Unit For Light Adjustment (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installing Control Unit For Light Adjustment

Installing Control Unit For Light Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the seal -3-  is fitted correctly on the control unit for light adjustment.
  2. Carefully insert control unit for light adjustment into headlights.
  3. Tighten fastening screws -1-  .
    Fig 1: Installing Light Adjustment Control Unit
    G09999270Courtesy of PORSCHE CARS NORTH AMERICA, INC.