Assessment Of Wheel Adapters, Wheel And Brake Disc
- Check wheel adapters → Checking wheel adapters
.
Assessment of wheel adapters Look normal for a vehicle that has been driven Excessive signs of wear Light scratches on the surface
→ Wheel adapters OK- There are light scratches on the surface of the wheel adapters -arrows- .
- The scratches are caused by removing and fitting wheels and can be deeper scratches or just minor scrapes, depending on how often the wheel has been changed.
Eloxal coating is completely worn down in places
→ Wheel adapters not OK- The red Eloxal coating on the wide surface is completely worn down on the cylindrical surface of the wheel adapters -arrow- .
- The wheel adapters must also be replaced if they can be turned by hand.
Wheel adapters OK- Additional picture:
Wheel adapters OK (1)
Wheel adapters not OKResult/Action required → The wheel adapters do not have to be replaced. → The wheel adapters and wheel hub must be replaced. - Check the contact surface for the brake disc on the wheel
(→ Checking wheel contact surface
).
Assessment of wheel contact surface Looks normal for a vehicle that has been driven Excessive signs of wear Discoloration or slight irregularities on the surface
→ Wheel contact surface OK- Discoloration or slight irregularities on the surface due to the slightest movements while driving (micro-movements) are OK -arrow- .
- The contact surface is smooth (flat).
- Material is not worn down.
Material erosion
→ Wheel contact surface not OK- There is material erosion on the outer edge -arrow- of the wheel contact surface.
- The edge is worn down (eroded) so much that there is a radius on the outer edge -arrow- .
- The wheel contact surface is uneven.
- Signs of wear can also be seen on the wheel hub and brake disc in accordance with the relevant description.
Wheel contact surface OK- Additional picture:
Wheel contact surface OK (1)
Wheel contact surface not OKResult/Action required → The wheel does not have to be replaced. → The wheel and wheel hub must be replaced.
→ If there are visible signs of wear on the brake disc in accordance with the description below, the brake disc must also be replaced. - Check the contact surface for the wheel on the brake disc
(→ Checking brake disc
).
Brake disc assessment Looks normal for a vehicle that has been driven Excessive signs of wear Discoloration or slight irregularities on the surface
→ Brake disc OK- Discoloration or slight irregularities on the surface due to the slightest movements while driving (micro-movements) are OK -arrow- .
- The contact surface is smooth (flat).
- Material is not worn down.
Material erosion
→ Brake disc not OK- Material erosion and some crater-shaped cracks can be seen on the wheel contact surface -arrow- .
- The contact surface is uneven.
Brake disc OK- Additional picture:
Brake disc OK (1)
Brake disc not OKResult/Action required → The brake disc does not have to be replaced. → The brake disc , wheel adapters and wheel hub must be replaced.
→ If there are visible signs of wear on the wheel contact surface in accordance with the previous description, the wheel must also be replaced.