Removing Rear Wheel Bearing Housing

Use universal drive shaft/wheel hub extractor as of model '86 Nr.87-1  to carefully press out the pin of the drive shaft until the shaft can be moved by hand.

Fig 1: Installing Shaft Extractor

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. To prevent damage to the drive shaft, slide protective hose over the drive shaft.

1. 2.1. Remove brake disc.

   → 465319 REMOVING AND INSTALLING REAR BRAKE DISC .

   → WM 465419 REMOVING AND INSTALLING REAR PCCB BRAKE DISC

2. 2.2. Remove brake shoes on parking brake.
3. 2.3. Remove actuator for electronic parking brake.

   → 466119 REMOVING AND INSTALLING ACTUATOR FOR ELECTRONIC PARKING BRAKE (EPB) .

1. 3.1. Remove trailing arms -1 and 2-  from the wheel bearing housing.
   Fig 2: Identifying Lower Trailing Arms

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 3.2. Remove spring strut -1-  from the wheel bearing housing.
   Fig 3: Identifying Spring Strut

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 3.3. Remove the upper trailing arms -1-3-4-  , connecting link (suspension/stabilizer) -2-  or PDCC actuator from the wheel bearing housing.
   Fig 4: Identifying Upper Trailing Arms

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.