| Stud for mounting the rear-axle carrier side section to the body |
M12 x 1.5 |
Tightening torque |
30 Nm |
|
|
| Fastening screws securing the rear-axle carrier side section to the body |
M12 x 1.5 x 95 |
Tightening torque |
90 Nm |
+ 90° |
|
| Fastening nut securing the rear-axle carrier side section to the body |
M12 |
Tightening torque |
90 Nm |
+ 90° |
|
| Fastening nut securing the rear-axle trailing arm at the rear to the rear-axle carrier side section |
M12 x 1.5 |
Tightening torque |
90 Nm |
+ 90° |
|
| Fastening nut securing the middle rear-axle trailing arm to the rear-axle carrier side section |
M12 x 1.5 |
Tightening torque |
90 Nm |
+ 90° |
|
| Fastening nut securing the front rear-axle trailing arm (toe control arm) to the rear-axle carrier side section |
M12 x 1.5 |
Tightening torque |
100 Nm |
|
|
| Fastening screw securing the self-levelling sensor holder to the rear-axle carrier side section |
M6 x 16 |
Tightening torque |
3.4 Nm |
|
|