Anti-Roll Bar/Front Connecting Link - Without PDCC: Notes
Also valid for 911 GT3 (991).
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Anti-roll bar clamp to front-axle cross member | Hexagon-head bolt, M10 x 60 + hexagon nut | Tightening torque | 65 Nm (48 ftlb.) | ||
| Connecting link (conventional suspension/stabiliser) to spring strut (shock-absorber pipe clamp) | M12 x 1.5 thread | Tightening torque | 85 Nm (63 ftlb.) | ||
| Connecting link (conventional suspension/stabiliser) to anti-roll bar | Collar nut, M10 x 1.5/always use new collar nut following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link (conventional suspension/stabiliser) to anti-roll bar | Collar nut, M10 x 1.5/always use new collar nut following removal | Final tightening | +30° |