Brake Lines
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake line to brake master cylinder | Cap screw, M12 x 1 | Tightening torque | 16 Nm (12 ftlb.) | ||
| Brake pressure line to hydraulic unit | Cap screw, M14 x 1 and M12 x 1 | Tightening torque | 16 Nm (12 ftlb.) | ||
| Brake lines to brake hose (front and rear axle) | M10 x 1 | Tightening torque | 16 Nm (12 ftlb.) | ||
| Transfer points - brake line to brake line | Cap screw, M10 x 1 | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Brake lines to brake calliper (front and rear axle) | M10 x 1 | Tightening torque | 16 Nm (12 ftlb.) |