LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (30 Clutch, Actuation -- 911 CARRERA (991)) >> WM 304719 Removing And Installing Guide Sleeve (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3) >> Removing Guide Sleeve

Removing Guide Sleeve

WARNING: This page is about a different variant/trim than selected.
  1. Remove release lever and release bearing.
    Fig 1: Removing Lever And Bearing
    G09992248Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. -A-  : Press wire spring -3-  in direction of arrow and disengage it.
    2. 1.2. -B-  : Remove release lever -1-  together with the release bearing -2-  .
  2. Unscrew fastening screws -1-  .
    Fig 2: Identifying Screws For Guide Sleeve
    G09992249Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove guide sleeve.
scientia non olet · About LEMON Manuals