LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (30 Clutch, Actuation -- 911 CARRERA (991)) >> WM 303019 Removing And Installing Clutch Slave Cylinder (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Bleed the clutch hydraulic system. → 300107 BLEEDING THE CLUTCH SYSTEM 
  2. Check operation of the clutch. Repeat the BLEEDING  process if the clutch does not disengage correctly.
  3. Install rear underbody panelling, → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY
scientia non olet · About LEMON Manuals