Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brace plate to rear body | Hexagon-head bolt, M10 x 40 - initial tightening and torque angle | Tightening torque | 30 Nm (22 ftlb.) | +90 Grad | |
| Transmission bracket to body | Hexagon-head bolt, M10 x 50 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission support to body | Collar nut, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission bracket to transmission mount | Screw, M12 x 140 with M12 collar nut | Tightening torque | 120 Nm (89 ftlb.) | ||
| Impact absorber to Porsche Doppelkupplung (PDK) | M8 screw | Tightening torque | 30 Nm (22 ftlb.) |