Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Shift cover to transmission |
Aluminum screw, M8 x 22 - always replace screws - medium setting |
Initial tightening |
6 Nm (4.5 ftlb.) |
|
|
| Neutral gear sensor to shift cover |
Torx screw, M5 x 12, replace screws |
Tightening torque |
5.5 Nm (4 ftlb.) |
|
|