Removing Shift Cover

WARNING: This page is about a different variant/trim than selected.

Remove neutral gear sensor -1- .
1. 1.1. Unscrew and remove two screws -2- .
2. 1.2. Replace screws.
  
  Fig 1: Removing Neutral Gear Sensor
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Move shift lever -1- to 4th gear position.
1. 2.1. Press lower shift lever to the left -arrow- .
  
  Fig 2: Pressing Lower Shift Lever
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 2.2. Check position of shift lever -1- .
  
  Fig 3: Positioning Shift Lever
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove aluminum screws -1- on the shift cover.
1. 3.1. Replace screws.
  
  Fig 4: Removing Shift Cover Screws
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove shift cover -1- and dispose of seal -2- .

Fig 5: Removing Shift Cover And Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean sealing faces.