System readiness
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The system allows the position to be changed if at least one of the following requirements is fulfilled:
- Term. 15 is switched on
or
- The driver's door is opened
Operational readiness is maintained for an after-running time of 60 s after the key has been removed or the door has been closed. If the position is changed during the after-running time, then the after-running time is started again. If the position is not changed during the after-running time, then the system switches to inactive state, thus reducing power consumption.
NOTE: Terminal 15 must be switched on for communication with the PST 2.