Switch for seat adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Manual adjustment of the seat positions is carried out by actuating the three switches located on the driver's seat (front seat).

Fore-and-aft adjustment and height adjustment are carried out by actuating the switch in the positions shown in Fig 1 .
The seat backrest can be brought into desired position
by actuating the switch.
The lumbar support is inflated or deflated by actuating the switch.

Fig 1: Identifying Switch Positions For Seat Adjustment
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2 shows how the following system components are

arranged under the front seat.

Control module
Electric motor for front height adjustment
Electric motor for seat adjustment
Electric motor for rear height adjustment

Fig 2: Identifying Seat Adjustment System Components
Courtesy of PORSCHE OF NORTH AMERICA, INC.