Test point 8: Elimination:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Check plug on control module for contact and damage.
Check wire to sensor for damage.
Once the cause of the fault has been found and eliminated, actuate the fore-and-aft adjustment switch. The text in the fault memory changes from present to not present if the cause of the fault has really been eliminated.
If no fault is detected in the wire on the sensor, replace the electric motor for seat adjustment.
If the fault is still present, replace control module.