Test point 26: Elimination:
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Erase fault memory and read out again.
If the fault appears again, proceed as described below:
- Select menu item Input signals.
The following button positions can be read out in the menu item Input signals.
- Button M
- Button 1
- Button 2
- Button 3
- Fore-and-aft adjustment forward
- Fore-and-aft adjustment backward
- Backrest forward
- Backrest backward
- Front height upward
- Front height downward
- Rear height upward
- Rear height downward
- Backrest forward
- Backrest backward
- Button up
- Button down
- Button backward
- Button forward
- Select a maximum of 8 button positions.
- Search for the key on the screen that is continuously actuated. A comparison table can be found on ACTUAL VALUES . If a key is detected as faulty, replace the switch for memory seat adjustment or the switch for seat adjustment as appropriate.