LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (24 - Fuel System - Electronic Ignition) >> WM 243019 Removing And Installing Fuel Distribution Pipe (Fuel Rail) On DFI Engines >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit intake-air distributor. The lower fuel distribution pipe must be fitted during assembly. → Installing Intake-Air Distributor 
  2. Fit high-pressure pump. → Installing High-Pressure Pump 
scientia non olet · About LEMON Manuals