Fault memory Info key F8
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
In order to be able to assess the fault exactly, the fault memory Info key F8 must be pressed. This information should be saved using the Save key "F4" and printed out. If a fault code is stored with "not present" status and no other problems are present, then the fault memory must be erased.
Open circuit - short to ground / voltage short / version; vehicle parameters / counter
| Counter: | When a fault first occurs, a fault entry is made in the fault memory and the counter is simultaneously set to 50. If a fault is present, the counter is incremented by 1 each time the ignition is switched on. The maximum count is 100. The counter is decremented if the fault is no longer present. The fault memory is erased automatically when the counter reaches 0. |