Possible cause of fault
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Open circuit between the micro switch pre-notch and the control module
- Micro switch pre-notch in the closing aid defective
NOTE:
- The status of the three micro switches in the closing aid for the Targa rear window can be read out in the menu item Input signals under Closing aid switch I to III.
- There are 3 micro switches in total in the closing aid module
NOTE:
- Fault code 9 is always entered when the rear window is not unlocked even though the closing aid has been activated. This may occur when the rear window is covered in heavy ice.
- Fault code 9 is only entered after the 3rd unsuccessful attempt to unlock the rear window.