Replacing the closing aid
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
After replacing the closing aid, the following operations must be carried out:
- Connect PST 2 and switch on ignition.
- Select the menu item Reset and carry out the reset
- Unlock the closing aid and then lock it again
NOTE:
When the battery is disconnected, the function of the sliding roof is always only influenced if a mechanical operation is carried out.