Adjusting camber

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

After loosening the lock nut, turn eccentric B appropriately.

Fig 1: Adjusting Toe & Camber

Courtesy of PORSCHE OF NORTH AMERICA, INC.

NOTE:

Use special tool 9626 in combination with a torque wrench to loosen and tighten the lock nuts of the toe and camber eccentrics. The prescribed lock nut tightening torque of 100 N.m (74 ftlb.) also corresponds to a setting on the torque wrench of approx. 100 N.m (74 ftlb.).

Fig 2: Adjusting Lock Nuts Of Toe And Camber Eccentrics

Courtesy of PORSCHE OF NORTH AMERICA, INC.