Adjusting camber
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The camber is adjusted by moving the spring strut transversely. For this purpose, loosen the three fastening nuts on the spring-strut mount and, to move the spring strut, remove the covering cap on the piston rod.
NOTE:
The steering angle sensor must be calibrated if the previous wheel alignment values for vehicles with PSM (Porsche Stability Management) were changed!