LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Wheels, Tires, Suspension Alignment - 911 CARRERA (996)) >> Alignment card - 911 Carrera 4S

Alignment card - 911 Carrera 4S

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Alignment Card - 911 Carrera 4S
G03105735Courtesy of PORSCHE OF NORTH AMERICA, INC.

Since mainly electronic wheel-alignment testers in conjunction with printers are used, a specimen alignment card is rarely required nowadays. In order for measured results to be documented in individual cases, however, a copy of the alignment card shown above can be used.

NOTE:
  • In practice this means that alignment cards cannot be ordered!
  • The alignment cards can be used for all 911 Carrera 4S (996), USA and RoW!
  1. Prepare copies of the corresponding alignment card shown.
  2. Before measurement, enter the general data, vehicle model and the missing nominal values into the copied alignment card.
    NOTE:
    • Actual values that are identical in all designs have already been entered!
  3. Enter the appropriate version, e.g. USA or RoW, in the Model column.
  4. Carry out incoming measurement (actual status) and enter the values in the alignment card.
  5. After adjustments (if these were necessary), enter the actual values in the column Outgoing measurement.