LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Wheels, Tires, Suspension Alignment - 911 CARRERA (996)) >> Adjusting values for suspension alignment - 911 Carrera >> Vehicle height

Vehicle height

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The following values relate to the empty weight, i.e. full fuel tank, vehicle with spare wheel/collapsible wheel and tools, but without driver and without additional weights!
  • X74 = 30 mm lower. This can be identified by 1 yellow mark on the shock absorber!
VEHICLE HEIGHT SPECIFICATION - 911 CARRERA

Vehicle height Carrera 2/4
USA: Standard and Sport
Carrera 2/4
RoW: Standard
Carrera 2/4
RoW: Sport
Carrera 2/4
30 mm lower
(X74)
Front-axle height
with 17-inch wheels [mm]
157 +/- 10 147 +/- 10 137 +/- 10 117 +/- 10
with 18-inch wheels [mm] 158 +/- 10 148 +/- 10 138 +/- 10 118 +/- 10
From road contact surface to lower edge of hexagon-head bolt (a/f 18) of the tension-strut screw connection to the body.
Rear-axle height
with 17-inch wheels [mm]
157 +/- 10 157 +/- 10 147 +/- 10 127 +/- 10
with 18-inch wheels [mm] 163 +/- 10 163 +/- 10 153 +/- 10 133 +/- 10
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).