LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Wheels, Tires, Suspension Alignment - 911 CARRERA (996)) >> Adjusting values for suspension alignment - 911 Carrera 4S >> Vehicle height

Vehicle height

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The following values relate to the empty weight, i.e. full fuel tank, vehicle with spare wheel/collapsible wheel and tools, but without driver and without additional weights!
  • The 911 Carrera 4S is delivered with just one running gear tuning!
VEHICLE HEIGHT SPECIFICATION - 911 CARRERA 4S

Vehicle height Carrera 4S USA Carrera 4S RoW
Front-axle height
with 18-inch wheels [mm]		 158 +/- 10 138 +/- 10
From road contact surface to lower edge of hexagon-head bolt (a/f 18) of the tension-strut screw connection to the body.
Rear-axle height
with 18-inch wheels [mm]		 163 +/- 10 153 +/- 10
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).
scientia non olet · About LEMON Manuals