LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seats - 911 CARRERA (996)) >> Removing and installing switch for seat adjustment >> Removing switch for seat adjustment

Removing switch for seat adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Switch For Seat Adjustment
G03106127Courtesy of PORSCHE OF NORTH AMERICA, INC.
SWITCH FOR SEAT ADJUSTMENT REMOVING PROCEDURE

No. Procedure Instructions
  Removing front seat. See REMOVING AND INSTALLING FRONT SEAT  .
1 Removing switch -2-  . See Fig 1 . Unscrew fastening screws -1-2-arrow-  . See Fig 1 .
2 Control module -4-  . See Fig 1 . Undo fastening screws -3-4-arrow-  . See Fig 1 .
3 Plug connection -6, 7, 8-  . See Fig 1 . Pull plugs below seat -6-7-8-  . See Fig 1 .
4 Lead route between seat cushion and seat frame. -A  . See Fig 1 .
scientia non olet · About LEMON Manuals