Installing switch for seat adjustment
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SWITCH FOR SEAT ADJUSTMENT INSTALLING PROCEDURE
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Line -C-B- . See Fig 1 . | Push the plugs of line -C-A . See Fig 1 . |
| 2 | Line route -9- . See Fig 1 . | In connection with the seat memory control module, lay the line -9-4- . See Fig 1 . |
| 3 | Plug connection -6, 7, 8- . See Fig 1 . | Plug connection without control module for seat memory. Join plugs for -6-7-8- . See Fig 1 . |
| 4 | Plug connection -arrow-4- . See Fig 1 . | Clip plugs on to each other starting on the right, natural, blue, black and plug on to the control module -arrow-4-3- . See Fig 1 . |
| 5 | Installing switch -2- . See Fig 1 . | Insert the switch -in direction of arrow-1- . See Fig 1 . |
| Installing front seat. | See REMOVING AND INSTALLING FRONT SEAT . |