LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seats - 911 CARRERA (996)) >> Removing and installing motor for the lumbar support >> Removing electrical line for the lumbar

Removing electrical line for the lumbar

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRICAL LINE FOR LUMBAR REMOVING PROCEDURE

No. Procedure Instructions
5a Electrical plug connection -5-  . See Figure . Pull off plug -5-arrow-4-  . See Figure .
5b Electrical plug connection -6-  . See Figure . Pull plug connection -6-  . See Figure .
6 Electrical line -7-  . See Figure . Observe lead route -arrow-  . See Figure .
7 Electrical line Line runs parallel to the white air hose -A-  . See Figure .