LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seats - 911 CARRERA (996)) >> Removing and installing front seat - as of MY 1996 >> Removing front seat

Removing front seat

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Front Seat (As Of MY 1996)
G03106096Courtesy of PORSCHE OF NORTH AMERICA, INC.
FRONT SEAT REMOVING PROCEDURE (AS OF MY 1996)

No. Procedure Instructions
1 Removing seat rail cover -2A-  . See Fig 1 . Unscrew the sheetmetal screws out of the seat rail cover at the front -2A-2A-  . See Fig 1 .
2 Removing seat rail cover -2B-  . See Fig 1 . Insert a screwdriver under the locking tabs and press lightly upwards. -2B-  . See Fig 1 .
CAUTION: -2B-  . See Fig 1 .

Locking tabs can break. -2-B-  . See Fig 1 .

Pull front seat rail cover -2B-  . See Fig 1 .
3 Undoing seat screws at front Move seat to its rear limit position and undo the front M10 x 28 Torx screws -3-  . See Fig 1 .
4 Undoing seat screws at rear Move seat to its front limit position and undo the M10 x 28 Torx screws -3-  . See Fig 1 .
5 Disconnecting the electrical plug connection Release plug connector locking device on the side -arrow---  . See Fig 1 .
scientia non olet · About LEMON Manuals