LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seats - 911 CARRERA (996)) >> Removing and installing electric motor for the backrest adjustment >> Routing of wiring harness for the backrest adjustment

Routing of wiring harness for the backrest adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Routing Of Wiring For Backrest Adjustment
G03106122Courtesy of PORSCHE OF NORTH AMERICA, INC.
  1. -A-  Plug on the control module for the memory seat adjustment. See Fig 1 .
  2. -B-  Plug on the backrest adjustment motor. See Fig 1 .
  3. -X-  Plug connection - without control module for the memory seat adjustment. See Fig 1 .
scientia non olet · About LEMON Manuals